# 1-Head Ready To Use.
# 2-Rods And Intermediate Shaft.
# 3-Block Ready To Paint.
# 4-Pistons, Main & Rod Bearings,
Cam Gear, Crank Gear and Intermediate Shaft Seal Carrier.
# 5-Block Painted
# 6-Pan, Valve Cover, Motor and Injection Pump Mounts
# 7-Injection Pump Lines, Injectors and Glow Plugs
# 8-Block With Pistons Installed.
# 9-Block With Oil Pump Installed.
# 11-Block With Pistons (Shown Checking Piston Projection)
# 12-Block Shown With Special Guides To Prevent Gasket Slippage.
# 13-Head Bolts (Use Anti Seize On These)
# 14-Block With Injectors, Glow Plugs & Buss Bar Installed.
# 15-Completed Motor.
